Start with the footprint, not the features
The Design Studio measures 42"W x 27"D x 32"H, so the first setup decision is where that footprint fits without crowding the room. Leave enough open floor around the table for children to sit, stand, and lean as they work, and check that the easel side can be reached without climbing over the table.
Because the studio adapts to sitting, standing, and leaning, treat placement as part of the setup rather than an afterthought. A wall or low shelf behind the table helps define the art zone, while keeping the front edge clear makes it easier for up to three children to share the activity table at once.
What the Design Studio includes
- Design Studio - 3 in 1 Art Table, Drafting Table, Easel, and Stool: The Design Studio combines an art table, drafting table, activity table, and easel in one unit for children ages 3 through 8. Knowing the full range of uses helps you plan a single art zone instead of separate furniture pieces.

Design Studio - 3 in 1 Art Table, Drafting Table, Easel, and Stool - Design Studio - 3 in 1 Art Table, Drafting Table, Easel, and Stool: The main flat activity table angles up and transforms into a drafting table using a slow-close pneumatic hinge and safety cleat. The hinge and cleat are the adjustment points to check during setup and each time children change the table angle.
- Design Studio - 3 in 1 Art Table, Drafting Table, Easel, and Stool: The two-sided easel has paper-holding clips on one side and a black chalkboard on the other. This tells you which side to face outward depending on whether the child is using paper or chalk.
- Design Studio - 3 in 1 Art Table, Drafting Table, Easel, and Stool: Storage includes cubby shelves, three fabric bins, an art caddy, and a paint tray with removable cups that move between the activity table and easel. Deciding where each storage piece lives at setup keeps supplies reachable and reduces mid-project clutter.
- Design Studio - 3 in 1 Art Table, Drafting Table, Easel, and Stool: The adjustable drafting stool lets children adjust to their height and seating style and is also sold separately. If the stool is part of your setup, plan its position near the table so children can move between sitting and standing.
A setup sequence that keeps the art zone usable
Work through these steps in order so the table, easel, and storage end up in a configuration children can use without help.
- Place the studio on a level surface: Set the 42"W x 27"D x 32"H unit where it sits flat and has clearance on all sides for children to move around it.
- Test the drafting table hinge and cleat: Before children use the angled position, raise and lower the activity table to confirm the slow-close pneumatic hinge moves smoothly and the safety cleat locks securely.
- Choose which easel side faces the room: Decide whether the paper-holding clips or the black chalkboard should be the side children see first, then position the easel accordingly.
- Assign the storage pieces: Put the cubby shelves, three fabric bins, art caddy, and paint tray where children can reach them from both the activity table and the easel. Keep the removable cups with the paint tray so they can move between stations.
- Set up the stool if you have it: Place the adjustable drafting stool near the table so a child can sit at the flat activity table or stand back for easel work. Adjust it to the child's height and seating style.
Daily care for the table, easel, and stool
The supplied product information does not include a cleaning method, so avoid guessing at cleaners or techniques. A practical default is to wipe the flat activity table after each session with a soft, damp cloth and dry it, then check the drafting table hinge and safety cleat for smooth movement before the next angled use.
For the easel, keep the paper-holding clips clear of scraps and wipe the black chalkboard with a dry cloth or chalkboard eraser. The paint tray's removable cups are the easiest part to rinse; empty and clean them after painting so dried paint does not build up between the table and easel.
The three fabric bins and art caddy benefit from a quick sort at the end of the week. Remove scraps, broken chalk, and dried paint bits so the storage stays useful and children can find supplies without emptying everything.
Checkpoints before each art session
A short check takes less time than cleaning up a surprise, especially when children change the table angle or move the paint cups.
- Drafting table lock: Confirm the safety cleat is engaged and the table is stable before a child leans on the angled surface.
- Easel side: Check that the paper-holding clips are secure and the chalkboard side is clean enough for the next drawing.
- Paint tray cups: Make sure the removable cups are seated in the paint tray and positioned on whichever surface, table or easel, the child is using.
- Stool position: If the adjustable drafting stool is in use, check that it is set to the child's height and not blocking the table's front edge.
- Floor clearance: Keep the area around the 42"W x 27"D footprint clear so children can sit, stand, and lean without tripping.
Choosing a finish and planning for shared use
The Design Studio comes in white, black, and natural finishes. The choice is mostly about how the art zone fits the room: white and natural tend to blend with light walls and wood tones, while black makes a stronger visual statement. None of the supplied information indicates a performance difference between finishes, so pick the one that suits your space.
The activity table accommodates up to three children at once, which makes the studio a natural fit for siblings or a small group. If you expect regular shared sessions, set up the storage so each child has a reachable bin or caddy section, and keep the paint tray cups assigned to the table or easel rather than moving them mid-project.


